Atoll
Atoll Electronique IN200 Signature Integrated Amp-Preamp
Atoll Electronique IN200 Signature Integrated Amp-Preamp
Couldn't load pickup availability
The IN200 Signature integrated amp-preamp is manufactured with the greatest care: we choose the best possible components to achieve the highest level of sound performance. This rigorous search for perfection goes through the design of proprietary ATOLL circuits in order to preserve the integrity of the most subtle musical signals.
Connectivity
Inputs
5 Audio inputs (RCA): AUX (or optional P50 / P100 phono stage), CD, TUNER, DVD, TAPE (IN + OUT).
1 BY-PASS input (used as a power amplifier).
Outputs
2 Line preamp outputs (for bi-amplification or to connect a subwoofer).
1 Trigger output (12V).
Various
1 Headphone jack Ø 6,35 mm.
Internal wiring of loudspeaker outputs with the specific audio cable.
Gold-plated (RCA) connectors.
Our balanced MOS-FET amplifier circuits offer excellent harmonic gradients and have no memory effect, every moment, the current is immediately delivered to your speakers. This is one of the secrets of the musicality that ATOLL amplifiers enjoy.
Optional Digital Board
- An optional board with several Digital Inputs is available, including:
- 1 Bluetooth receiver: Direct digital to the AKM audio converter
- 2 Coaxial Inputs (24Bits/192kHz)
- 2 Optical Inputs (24Bits/192kHz)
- 1 USB-B Input: PCM & DSD
- Audio converter: AKM – AK4490
- PCM from 16 bits to 32bits up to 384 kHz on USB-B input (asynchronous).
- DSD : DSD64 & DSD128.
- USB Interface: XMOS with specific program designed for ATOLL.
“Atoll is one of the manufacturers of electronics whose transparency we appreciate, by which we mean neutrality, liveliness and self-effacement in front of the music. With the IN200 Signature, there is maturity in the design and especially in the No clean signature, no tonal redundancy from one track to another, but rather a unique and distinct reading of each score, with now Class A flavours that are found throughout the spectrum and over a wide range of listening levels”.
Features
Features
- 8 mm brushed aluminium front panel.
- 2×120 W / 8Ω.
- 2 toroidal transformers of 340 VA chacun.
- Filter capacitors: 8×6800 μF high quality, low ESR specific for ATOLL.
- Specific low consumption 5 VA power supply for the digital stages.
- MOS-FET double push-pull power stage.
- 2 volume attenuators: 1 per channel to maintain the dual mono architecture.
- Shielded MKP Mundorf capacitors.
- Possibility to adjust and memorise the balance.
- Discrete component audio stages.
- MKP Technology Link Capacitors.
- High-performance heat sinks, direct thermal coupling.
- Double-sided circuit boards with nickel/gold finish.
- Polarization of output stages in class A/B.
- Thermal protection.
- Optional DAC board: same as included in IN300.
- Optional PHONO boards: P50 and P100, can be combined with the DAC board.
- ATOLL global remote control.
Specifications
Specifications
- Output power/8Ω: 2×120 W
- Output power/4Ω: 2×200 W
- Power supply: 2×340 VA
- Total of capacitors: 62 853 µF
- Number of inputs: 5+1 BY-PASS
- Bandwidth: 5 Hz – 100 kHz
- Rising time: 2,5 µs
- Input impedance: 220 kΩ
- Sensitivity: 350 mV
- Signal/Noise ratio: 100 dB
- Distortion at 1 kHz: 0,05% / 10 W
- Dimensions: 440×309×95 mm
- Weight: 12 Kg
What's in the box
What's in the box
- Atoll Electronique IN200 Signature Integrated Amp-Pre-amp
Share
